OxyPond Cleaner by Microbe-lift
Price: Price Varies
New from Microbe-lift is OxyPond Cleaner which uses oxygen power to break down unsightly debris and string algae. Especially helpful on streams and waterfalls, deep cleans rocks and planters. Oxydizes and Detoxifies to help prevent pond odors. Dosage varies depending on the amount of debris or algae. Safe for fish and plants.
501-1000 gallons 8oz initially, 4oz weekly thereafter
1001-1500 gallons 12 oz initially, 6oz weekly thereafter
1501-2500 gallons 16 oz initially, 8oz weekly thereafter
For light accumulation use initial dosage at half dosage. Always test for ammonia in your pond water using Microbe-lift Ammonia Test Strips. Do not apply if ammonia levels exceet 1.0mg/L
BEFORE USE: Use MICROBE-LIFT/ AMMONIA TEST STRIPS to test for the presence of ammonia in your pond water. If ammonia levels are above 0.8mg/L, DO NOT apply MICROBE-LIFT/ OPC OXY POND CLEANER until the ammonia level is brought down below 0.8mg/L. If ammonia levels exceed 1.0mg/L, add MICROBE-LIFT/ AMMONIA REMOVER.
Apply a light application to the area needing to be cleaned.
Large Ponds & Lakes
Apply around perimeter of pond/lakes as much as needed.
Pond Cleaning/ Non-Painted Surfaces
6 cups (96oz.) per 1,000 sq. ft. of surface area to be cleaned.
AFTER USE: Ammonia levels should be monitored for two days following applications of ANY/ALL oxygen release compounds as they can kill beneficial bacteria in a pond/lake resulting in an ammonia or nitrite spike. Use MICROBE-LIFT/ AMMONIA TEST STRIPS to test for the presence of ammonia. If your ammonia levels exceed 1.0mg/L., add MICROBE-LIFT/AMMONIA REMOVER to reduce the ammonia level to 0.8mg/L or below.